Precision Pen Math

Retatrutide Calculator: Pen Calculator, Pens, Vial Units & Dial Limits

The retatrutide pen calculator converts a target research amount in mg into the exact click count for your selected pen format—10mg, 20mg, 30mg, or 40mg—and also estimates dial turns, pen duration, and how many pens are needed for multi-week research protocols. Built for laboratory scientists, researchers, and academic or commercial biotech labs in the UAE and GCC running in-vitro peptide work, it helps plan precise retatrutide dosing within each pen’s click increments and dial limits.

You can use it to check mg-to-click conversions without creating an account, compare pen formats, map out repeat dosing schedules, and move from pen-based planning to related vial reconstitution, storage and handling, pen mechanics, dosage schedule, and batch-verification guidance, including certificate-of-analysis documentation and matching the batch number to the published HPLC analysis report. That accuracy matters in peptide research because verified quantities, format limits, and reproducible calculations support cleaner protocol design and research-use-only compliance.

  • 10mg / 20mg / 30mg / 40mg pens
  • 300 clicks per pen
  • 0.033 / ~0.067 / 0.1 / ~0.133mg per click
  • For Research Use Only

Live answer

40 clicks

for 4 mg on the selected 30mg pen.

Pen 30mg / 300 clicks
Per click 0.1mg
Dial cap 60 clicks
Retatrutide 30mg Pen — AED 1,600 · published batch report RETP002 Order →

Retatrutide research peptides pen calculator — dial caps and splits

Retatrutide pen calculator at a glance. On the 30mg retatrutide pen, each click equals 0.1mg. That means 0.5mg = 5 clicks, 1mg = 10 clicks, 2mg = 20 clicks, 4mg = 40 clicks, 6mg = 60 clicks, 8mg = 80 clicks, and 12mg = 120 clicks. The 30mg pen contains 300 clicks total and the dial caps at 60 clicks per dispensing cycle.

Every retatrutide research pen holds 300 clicks. Mg per click by pen: 10mg pen = 0.033mg/click, 20mg pen = 0.067mg/click, 30mg pen = 0.1mg/click, 40mg pen = 0.133mg/click. Dial cap per cycle: 30mg pen = 60 clicks (6mg); 10mg / 20mg / 40mg pens = 75 clicks. The goal is to remove manual math from protocol planning, including cycle length in multi-week research workflows, and make the click count, dial turns, and pen duration easy to verify before any research workflow is documented.

Retatrutide calculator formula: mg per click = total pen mg / 300 clicks. Clicks needed = target research mg / mg per click, rounded to the nearest whole click and checked against the dial cap. This page is for in-vitro laboratory research planning only; it does not provide medical advice, diagnosis, or treatment, and it is not a human-use dosing, injection, treatment, or medical-advice tool.

Target mg 10mg pen 20mg pen 30mg pen 40mg pen
0.5mg15 clicks8 clicks5 clicks4 clicks
1mg30 clicks15 clicks10 clicks8 clicks
2mg60 clicks30 clicks20 clicks15 clicks
2.5mg75 clicks (cap)38 clicks25 clicks19 clicks
4mgsplit 75+4560 clicks40 clicks30 clicks
6mgsplit 75+75+3090 → split60 clicks (cap)45 clicks
8mg240 → split120 → split80 → split60 clicks
12mgn/a180 → split120 → split90 → split

Fractional results are rounded to the nearest whole click; 1mg on the 40mg pen, for example, is exactly 7.5 clicks. For the exact values, a clicks-to-mg reverse lookup and answers to common click questions, see the retatrutide pen clicks-to-mg chart.

Pens needed for the 16-week Phase 2 12mg-arm reference (104mg total): 10mg pen = 11 pens; 20mg pen = 6 pens; 30mg pen = 4 pens; 40mg pen = 3 pens. Each weekly amount is rounded to whole clicks by format; remaining clicks are shared across events in this course before rounding up to whole 300-click pens. For Research Use Only.

This tool models click math only and does not predict steady state in the body or a plasma curve from repeated use.

Quick answer — 30mg pen clicks

  • 1mg = 10 clicks
  • 2mg = 20 clicks
  • 2.5mg = 25 clicks
  • 6mg = 60 clicks

Direct answer: on the 40mg retatrutide pen, each click delivers ~0.133mg and the pen holds 300 clicks (300 × ~0.133mg = 40mg). By target research amount: 0.5mg = 4 clicks, 1mg = 8 clicks, 2mg = 15 clicks, 4mg = 30 clicks, 6mg = 45 clicks, 8mg = 60 clicks, and 10mg = 75 clicks.

The 40mg pen dial caps at 75 clicks (10mg) per dispensing cycle, so a 12mg target works out to about 90 clicks and is split across two dial settings. Select the 40mg pen in the calculator below for extended click sequences. Every 40mg click count from 0.5mg to 5mg is in the retatrutide pen clicks chart. For in-vitro laboratory research planning only — not a human-use dosing, injection, treatment, or medical-advice tool.

Pen Format
Choose Your Pen
30mg
0.1mg per click
Step 01
Research Amount
4
mg per calculation
Step 02
Frequency
1x
once weekly
Step 03
How Many Weeks?
8
weeks

Retatrutide dosage calculator results

Quick Output RETATRUTIDE PEN 30MG

Primary answer

Set the pen to 40 clicks

= 4mg. Check: 1mg = 10 clicks.

This is the calculated amount for the selected pen, not a new dose recommendation or an intended outcome.

Order 30mg Pen

Or order in chat

WhatsApp Telegram

Dialing from a pen that’s running low? Restock the 30mg pen — same-day in Dubai for orders before 4 PM; elsewhere in the UAE, next day if ordered before 12 PM, otherwise within two days.

Clicks Per Amount
40
clicks = 4mg
Amounts Per Pen
7
doses at 4mg
Scheduled Doses
8
over 8 weeks
Estimated Pens Needed
2
for full protocol
Single amount: 13%
40 / 300 clicks
A 4mg (40 clicks) dose once weekly for 8 weeks runs to 8 doses and 2 full pens. Each pen covers about 7 doses.

Explain this result (mg/ml)

Each click is 0.1mg. 4mg x 10 clicks per mg = 40 clicks.

Selected pen and syringe units lookup

Direct mg-to-click rows for the pen format selected above.

AmountClicksDial turnsPen duration
Vial Calculator
Calculations are for planning math only. Any private data handling belongs to the linked tools or guides, not this lookup table. View dosage guide Open clicks guide Open pen guide
Protocol Snapshot
2 full pens estimated for this plan
8-week protocol at 4mg once weekly
32mg total
8 doses
32mg / 30mg = 1.07, rounded up
Research-use supply estimate. When your protocol math is set, you can buy Retatrutide 30mg pen in Dubai with tier pricing (its published batch report is RETP002), or step up to the Retatrutide 20mg pen. The lyophilized Retatrutide 10mg vial is out of stock; it is supplier-mapped to the 40mg vial’s published batch RT-40-V-001. Open the clicks chart for direct conversion lookup, the dosage guide for schedule context, or the pen guide for storage and hardware limits. For where to buy and how Dubai suppliers compare, see the Dubai supplier comparison guide.
The estimates above assume consistent dosing and do not subtract priming losses, pauses, or protocol changes.
Open Pen Guide →

What do you need next? (retatrutide reconstitution)

Use These Companion Pages
The calculator handles planning math. Use the pages below when you need direct lookup, schedule context, or device-specific handling.

Static reference for the lyophilized 10mg and 40mg retatrutide vials supplied as peptide powder. Vial size, vial quantity, and total bacteriostatic water volume control the resulting concentration, draw volume, and total volume. Verify against your own vial, and use the live vial calculator with your own numbers for any mg vial.

Vial sizeBAC waterConcentrationU-100 units for 1mg
10mg vial1mL10mg/mL10 units
10mg vial2mL5mg/mL20 units
10mg vial3mL3.33mg/mL30 units
40mg vial1mL40mg/mL2.5 units
40mg vial2mL20mg/mL5 units
40mg vial3mL13.33mg/mL7.5 units

Math: concentration mg/mL = vial mg ÷ bac water mL. On a u 100 syringe, device specifications matter for accurate peptide calculations: 100 units = 1mL, so units to draw for a target mg = (target mg ÷ concentration mg/mL) × 100. Accurate measurement matters because a small change in added water changes the concentration and draw volume for every calculation. For laboratory handling context, how you mix the vial affects concentration handling: add bacteriostatic water slowly against the vial wall, then gently swirl or roll the vial; do not shake vigorously, since rough agitation can affect peptide integrity. After reconstitution, store refrigerated, because proper storage helps protect shelf life. See the bacteriostatic water guide for the 28-day discard window and storage notes.

A decimal error can materially change the draw amount, so check all dose math before handling the vial.

This peptide calculator targets the four retatrutide pen formats, the Retatrutide research pens in 10mg, 20mg, 30mg, and 40mg formats supplied for in-vitro research: the 10mg pen (~0.033mg per click), the 20mg pen (~0.067mg per click), the 30mg pen (0.1mg per click), and the 40mg pen (~0.133mg per click). Each format holds 300 clicks — mg per click changes with the pen’s total concentration, so the click count for the same research amount differs between formats. Once your format is chosen, you can compare all UAE retatrutide formats, buy Retatrutide 30mg pen in Dubai as the flagship option, or compare the Retatrutide 20mg pen and the Retatrutide 10mg vial.

Enter a target research amount in mg and the calculator returns the exact click count for the selected pen, plus dial turns and estimated pen duration. When the material is supplied as a lyophilized vial instead of a pen, the calculator works from vial strength, total milligrams, and target dose: the vial calculator first reads the amount from the vial label, then determines the bacteriostatic water volume, mg/mL concentration, and draw volume before any syringe-unit lookup is useful. In plain terms, how much bacteriostatic water or how much bac water changes concentration and draw volume, not the same dose or total peptide; sourcing retatrutide for laboratory research in Dubai and the wider UAE still requires lab-side verification and protocol design separate from this calculator.

Retatrutide (LY-3437943) is an investigational triple receptor agonist that engages the GLP-1, GIP (glucose-dependent insulinotropic polypeptide), and glucagon receptors in the published Phase 2 and Phase 3 research literature. It remains an investigational drug, and the calculator does not model receptor pharmacology — it handles the mg-to-click conversion math so research protocol planning stays within the dial-cap and pen-volume limits of the selected format.

Use the clicks chart for a static lookup table, the dosage guide for the TRIUMPH Phase 3 titration schedule, and the vial calculator when working with lyophilized 10mg or 40mg vials instead of prefilled pens.

Batch proof is published through Janoshik COAs, while pen-click math remains based on the 300-click pen mechanism. For scientific source tracking, match each certificate of analysis file to the product’s batch number; the retatrutide supplier checklist for UAE labs walks through COA verification, batch mapping, and delivery terms in more detail. See batch RETP002 and the full lab results for the 20mg pen, the 40mg vial batch line (supplier-mapped to the retatrutide 10mg vial), and the 30mg Remedium pen.

Research-use status: This page provides unit-conversion math for in-vitro laboratory planning and research purposes. Retatrutide is investigational, not FDA approved, and this page is not part of any FDA approval pathway. It does not recommend human or veterinary use, injection technique, treatment plans, personalized dose changes, or medical decision-making, which belong with a qualified clinician. It is not intended to treat disease or replace a clinical diagnosis.

Primary math source: the calculator uses one denominator across formats: 300 clicks per pen. The selected pen strength determines mg per click, then the dial-cap rule determines whether the result fits in one dispensing cycle or needs a split calculation.

Source laneWhat it verifiesBest reference
Pen math300 clicks per pen, mg per click, and dial-cap limitsPen clicks chart
Protocol contextPublished TRIUMPH schedule references and studied mg amountsDosage guide
Format mechanicsPen format handling, storage notes, and hardware limitsPen guide
Batch proofCOA files, Janoshik reports, HPLC purity, and batch identityCOA library

Whole-pen counts using the Phase 2 trial’s 12mg arm as a research reference (NEJM 2023): 2mg weekly in weeks 1–4, 4mg weekly in weeks 5–8, 8mg weekly in weeks 9–12, then 12mg weekly from week 13. Totals: 8-week course 24mg, 16-week course 104mg, 24-week course 200mg. For each pen format, every weekly amount is rounded to whole clicks; remaining clicks are pooled across events within the same course before rounding up to whole 300-click pens. These are published trial-schedule references for research math, not human or veterinary use instructions.

Pen format8-week course (24mg)16-week course (104mg)24-week course (200mg)
10mg pen3 pens11 pens20 pens*
20mg pen2 pens6 pens10 pens*
30mg pen1 pen4 pens7 pens
40mg pen1 pen3 pens5 pens*

* Exactly 100% of the clicks in those pens: no allowance for priming or losses.

How long does a 40mg retatrutide pen last?

The 60mg aqueous retatrutide research pen format illustrates how higher-fill pens extend total available clicks compared with a 40mg pen, but the same planning logic applies: the 40mg pen holds 300 clicks of about 0.133mg each, so how long it lasts depends on the clicks used per setting and how often. At 15 clicks (2mg) per setting the pen covers 20 settings; at 30 clicks (4mg) it covers 10. Lower settings may be sufficient for some research plans and do not need to reach the maximum dose. In the Protocol Planner tab, enter the target amount, frequency and number of weeks to get the per-pen duration and pens needed. This is planning math only, not medical guidance.

What is the retatrutide dosage calculator formula?

The formula is mg per click = total pen mg / 300 clicks, then clicks needed = target research mg / mg per click. For example, the 30mg pen gives 30mg / 300 = 0.1mg per click, so 4mg = 40 clicks. The calculator rounds to whole clicks and checks the dial cap.

Is this calculator a medical dosing tool?

No. This calculator is for research planning math only. It does not provide human-use dosing instructions, injection guidance, treatment advice, side-effect management, or personalized dose changes. Remy Research supplies research-use-only materials for in-vitro laboratory research, not human or veterinary use.

Can the same target mg be used across 10mg, 20mg, 30mg, and 40mg pens?

The same target research amount can be entered for any pen format, but the click count changes because mg per click changes. A 4mg target equals 120 clicks on the 10mg pen, 60 clicks on the 20mg pen, 40 clicks on the 30mg pen, and 30 clicks on the 40mg pen; dual-chamber formats such as the 60mg lyophilized retatrutide pen follow the same mg-per-click logic after activation, even though the peptide and diluent start in separate chambers.

What does this retatrutide planning tool calculate?

It converts a target research amount into clicks for the selected pen format (10mg, 20mg, 30mg, or 40mg), estimates how many scheduled calculations the plan includes, and shows how many pens the protocol will consume over time. It is planning math only, not medical guidance.

When does a result need to be split?

The 30mg pen dial tops out at 60 clicks (6mg) per dispensing cycle; the 10mg, 20mg, and 40mg pens dial up to 75 clicks per dispensing cycle. Targets above the dial cap need more than one dial turn.

Can this tool tell me how many pens I need for a multi-week protocol?

Yes. The calculator combines the target research amount, dosing frequency, and protocol duration to estimate how many full pens a plan will require. The estimate assumes consistent dosing and does not subtract priming losses, pauses, or protocol changes.

What is the difference between this planning tool and the clicks chart?

The clicks chart is the quick lookup page for direct mg-to-click conversions. This planning tool also estimates total doses, pens needed, and protocol duration.

Does this replace the full dosage guide?

No. This page handles the math. The dosage guide covers the broader Phase 3 titration schedule, escalation pace, and target amounts used in published retatrutide protocols.

Where do I check source documentation and pen specs?

Open the COA library for certificate files and the pen guide for format mechanics. For a full list of investigational compounds and formats, the research peptide catalogue for UAE labs summarises stock, formats, and AED pricing; for broader regional context, see peptides in the UAE.

What does 0.1mg per click mean on the 30mg retatrutide pen?

0.1mg per click means each dial increment dispenses 0.1mg of retatrutide from the 30mg pen. Ten clicks = 1mg, 40 clicks = 4mg, 60 clicks = 6mg (the per-cycle dial cap). The 30mg pen holds 300 clicks total because 30mg / 0.1mg per click = 300.

Why does mg per click differ across the 10mg, 20mg, 30mg, and 40mg pens?

All four pen formats hold 300 clicks. The mg-per-click ratio scales with the total mg loaded into the pen: 10mg / 300 = 0.033mg per click, 20mg / 300 ≈ 0.067mg per click, 30mg / 300 = 0.1mg per click, and 40mg / 300 ≈ 0.133mg per click. The retatrutide dosage calculator applies the correct ratio automatically when you pick a pen format.

How do I plan a multi-week research protocol with this calculator?

Switch to the Protocol Planner tab, set the target research amount (mg per calculation), dosing frequency, and total protocol length in weeks. The calculator returns clicks per dose, scheduled doses, pens consumed, and the per-pen duration. The output assumes consistent dosing and does not subtract priming losses or planned pauses.

What is the difference between the pen calculator and the vial calculator?

The pen calculator converts mg to clicks for the four prefilled retatrutide research pens; the 30mg aqueous retatrutide pen product page shows one such format in detail, including fill volume and batch-report notes. The vial calculator handles exact syringe units and units on a U-100 syringe for a retatrutide dose after vial mixing — vial size, vial quantity, bacteriostatic water volume, mg per mL concentration, and draw volume. It is for research purposes only and not a dosing recommendation. Use the pen calculator for pen formats, the vial calculator for vials.

How many retatrutide pens for an 8-week, 16-week, or 24-week research course?

The Phase 2 trial’s 12mg-arm reference schedule is 2mg weekly in weeks 1–4, 4mg weekly in weeks 5–8, 8mg weekly in weeks 9–12, then 12mg weekly from week 13. Totals: 8-week course 24mg, 16-week course 104mg, 24-week course 200mg. For 8/16/24 weeks, pen counts are 10mg = 3/11/20; 20mg = 2/6/10; 30mg = 1/4/7; 40mg = 1/3/5. Each weekly amount is rounded to whole clicks for its format, remaining clicks are pooled across events within the same course, and the course total is rounded up to whole 300-click pens. The Abu Dhabi-focused retatrutide sourcing guide applies these reference totals when discussing format selection, AED pricing, and typical delivery timelines. The 24-week counts for the 10mg, 20mg and 40mg pens use exactly 100% of the clicks, with no allowance for priming or losses.

How do I reconstitute a retatrutide vial with bacteriostatic water?

Add bacteriostatic water slowly down the inside wall of the lyophilized 10mg or 40mg vial, then gently swirl or roll the vial until the peptide powder dissolves into a clear solution, avoiding spraying liquid directly onto the powder, and store refrigerated after mixing. A reconstituted vial should be refrigerated, and reconstituted peptides are commonly cited as stable for 4-6 weeks when refrigerated, whereas plain sterile water may shorten storage because it lacks a preservative. The reconstitution reference table above shows how 1mL, 2mL, and 3mL bac water volumes change concentration and U-100 insulin syringe units. For the full step-by-step protocol, sterility notes, and the 28-day discard window, open the bacteriostatic water guide.

Working with a lyophilized vial instead of a pen?

Lyophilized 10mg and 40mg retatrutide vials need reconstitution with bacteriostatic water before in-vitro research use. The vial calculator returns the resulting mg per mL concentration, draw volume in U-100 insulin syringe units, and a reverse unit lookup showing how many units correspond to one unit step on the scale for a given mg dose once you set the vial quantity and bac water volume. Storage factors and repeated temperature stress can reduce research consistency. The pen formats skip the reconstitution step — the dial does the volume math for you.

When the material is supplied as a lyophilized vial instead of a pen, retatrutide reconstitution starts with the powder and water volume, and the reconstituted vial is then used for retatrutide reconstitution math before any draw is measured. More water lowers concentration but keeps the same dose and total peptide unchanged, which can make small doses easier to measure. A 10 mg vial mixed with 1 mL yields 10 mg/mL, while a 10 mg vial with 2 mL BAC water yields 5 mg/mL. The body of evidence discussed on linked research pages should be reviewed separately from calculator math. Retatrutide has a half-life of approximately 6 days.

Open Vial Calculator